Scotts Weed And Seed

ILGM

Buy Cannabis Seeds Online

Read customer questions about Scotts Turf Builder Weed and Feed 3 and get help with Scotts Turf Builder Weed and Feed 3 Can I Put Down Scotts Super Turf Builder Plus 2 If I Overseeded Four Weeks Ago?. A well-kept, healthy lawn should be plush, free of weeds and diseases, and as green as the neighbors’ envious hearts. Weed and feed products are designed to provide needed nutrients to the grass while poisoning weeds that want to … Learn how long it takes Scotts Weed and Feed to work to make sure you apply the right amount at the right times.

Scotts Turf Builder Weed and Feed 3 – Questions & Answers

Will Scotts Turf Builder Weed and Feed 3 harm my dog?
My dog eats grass sometimes. I’m concerned about my dog’s health and don’t want him to get sick or even die after fertilizing my lawn. Should I just quit fertilizing?

Scotts Turf Builder Weed and Feed 3 is safe for pets when it is used according to the product label. You want to make sure pets are not in the area while applying the product. Once the treated areas dry completely, chewing or eating grass will not be harmful and your pet can resume normal activity within the area.

It is recommended not to mow within 2 days before or after application of Scotts Turf Builder Weed and Feed 3.

It is recommended that you wait at least one month after an application of Scotts Turf Builder Weed and Feed 3 to reseed.

According to the product label, you do not want to water the lawn within 24 hours after application of Scotts Turf Builder Weed and Feed 3.

After applying Scotts Turf Builder Weed and Feed 3, weed stems will usually begin to twist and curl in several days, but a month or more may be required to see full control.

When is the best time to apply Scotts Turf Builder Weed and Feed 3 to my lawn, and how often can I use it?

Scotts Turf Builder Weed and Feed 3 is a fertilizer and post-emergent herbicide, so it is designed to be used in late Spring when target weeds are young and actively growing. You can reapply after at least 30 days as long as your turf is listed as safe. Do not make more than 2 applications per year. In the fall, do not treat centipede after the first of October and do not treat bahia after the first of November. Wait at least one month after using this product to seed, sod, or plant grass sprigs. Please refer to the product label for complete instructions.

Can I Put Down Scotts Super Turf Builder Plus 2 If I Overseeded Four Weeks Ago?

A well-kept, healthy lawn should be plush, free of weeds and diseases, and as green as the neighbors’ envious hearts. Weed and feed products are designed to provide needed nutrients to the grass while poisoning weeds that want to steal the lawn’s food. Scotts Super Turf Builder with Plus 2 Weed Control works on several species of lawn grasses. While the company’s website recommends waiting four weeks to put down grass seed after applying the weed and feed, seeding first means waiting a different length of time before you use the product.

See also  Bulk Cannabis Seed

Healthy Lawn Chemistry

Scotts Super Turf Builder with Plus 2 Weed Control, now called simply Super Turf Builder with Weed and Feed, contains more nitrogen and phosphorus than plain Turf Builder Weed and Feed, to provide faster green-up. Super Turf Builder contains 29 percent nitrogen, 2 percent phosphorus and 3 percent potassium, while plain Turf Builder contains 28 percent nitrogen, no phosphorus and 3 percent potassium. The active weed-killing ingredients are 2,4-D and mecoprop. Environmental health agencies in some areas list 2,4-D as a chemical known to cause cancer or birth defects, so use with caution.

If you are unable to find Super Turf Builder Weed and Feed, Scotts Turf Builder Triple Action provides similar results. It kills weeds, prevents the new weeds from sprouting and feeds the grass.

Timing Is Everything

The Scotts website question-and-answer section states that grass seeds should be allowed to germinate and grow tall and strong enough to be mowed four times before you apply weed and feed. No entirely specific time period is provided, because different grass species grow at different rates, and growth is affected by many variables, including soil quality, temperature and rainfall or manual irrigation.

The Nitty Gritty

This turf builder weed and feed should be applied with a mechanical spreader for even distribution. When using a spreader, Scotts Turf Builder Plus 2 spreader settings vary depending on the device. Set broadcast and rotary spreaders at 3.5, hand-held spreaders on 3 and drop spreaders on 5. Even if you’ve used the turf builder products for years, always check the package directions to ensure that the instructions haven’t changed.

Before applying any fertilizer or herbicide product, put on a mask, safety goggles, gloves, long sleeves, long pants and closed toe shoes. After applying the weed and feed and cleaning the spreader, wash your clothing in hot water and detergent to remove any dust or residue.

Wait for a calm day when temperatures are not expected to rise above 90 degrees Fahrenheit and no rainfall is expected for at least 24 hours. Water the lawn first to moisten the grass, or start the application when the grass is moist from dew. The product should be applied while weeds are actively growing in the lawn. A second application may be made, but wait at least 30 days — and do not use the product more than twice each year.

Scotts Turf Builder Plus 2 Liquid

If you have a very small lawn, an alternative to the granular Scotts weed and feed products is the Scotts Liquid Turf Builder with Plus 2 Weed Control. This liquid fertilizer provides a quick boost of nitrogen as well as killing clover, dandelions and other weeds. Simply attach the garden hose and spray the lawn when the weeds are actively growing.

Use It Carefully

Make sure the product does not spill or drift on the wind to desirable plants, and don’t use it within several feet of fruit or vegetable plants. Sweep up any fertilizer that drifts onto sidewalks or driveways and toss it back onto the lawn.

See also  Gumbo Weed Seed

Do not apply on St. Augustine grass, including the Floratam variety. St. Augustine grasses (Stenotaphrum secundatum) grow best in U.S. Department of Agriculture plant hardiness zones 8 through 10. The product is not appropriate for carpet grass (Axonopus affinis), which thrives in USDA zones 9 through 10, or dichondra (Dichondra spp.), a creeping ground cover often used in place of standard lawn grass in USDA zones 7 through 11.

How Long Does Scotts Weed and Feed Take to Work?

It may take up to 14 days to see full weed-killing results from Scotts Weed and Feed. However, the effects of the fertilizer component in the weed and feed will begin to work in as little as 1–5 days, with additional results for several weeks afterward.

The active ingredients in Scotts Turf Builder Weed and Feed are Dicamba and Mecropop, which are both post-emergent herbicides that attack established weeds in your lawn without harming the grass. These herbicides work by attacking plant systems to kill weeds down to the root. This process takes time but yields great results.

Table of Contents

How to Apply Scotts Weed and Feed for Best Results

To get the most out of your weed and feed, it’s essential to apply the product to your lawn at the right time and under the right conditions. Scotts Turf Builder Weed and Feed performs best when applied according to these guidelines:

  • Temperatures are 60–90℉.
  • The lawn is damp (from dew or light sprinkling) but not wet.
  • A lawn spreader is used to evenly distribute the product.
  • Do not water the lawn for 24 hours after application.
  • Avoid mowing for 48 hours after application.

A damp lawn provides the best surface for the herbicide to stick to weed leaves, which helps the weed control product infiltrate the plants and begin killing them. This provides a huge boost in its effectiveness. Just make sure your lawn isn’t so wet that the product washes away.

Signs Scotts Weed and Feed is Working

How will you know if your lawn care mission was a success? In order to determine if your Scott’s Weed and Feed application is delivering results, look for these signs:

  • 1–5 Days: Greener grass that appears to be growing thicker and faster.
  • 7 Days: Initial yellowing and wilting of weeds in the grass.
  • 14 Days: Most weeds in the lawn are brown, dead, and easily pulled out by hand.
  • 30 Days: Most broadleaf weeds in the lawn are dead. The grass is much more green and lush than before.

By following the application for Scotts Weed and Feed, you will initially see your grass growth surge as broadleaf weeds begin to wilt. Over time, the weeds will die as the grass grows thicker, taking over places where weeds previously grew.

How Long Does Scotts Weed and Feed Take to Absorb?

It can take up to 24 hours for Scotts Weed and Feed to be completely absorbed into weed systems. This is the reason it’s important to avoid watering and/or mowing shortly after applying weed and feed.

See also  Does Smoking Weed Seeds Make You Infertile

Although most of the herbicides in Scotts Turf Builder Weed and Feed are absorbed within 24 hours, the chemicals still require time to work their way through the plant and kill it. Just because the herbicide has been absorbed doesn’t mean it’s done working. Remain patient as the product works to wipe out weeds.

Can You Water after Spreading Weed and Feed?

Wait 24-48 hours before watering your lawn after spreading Scotts Weed and Feed. If you water too soon after application, you risk washing the herbicide off plant leaves. Watering too soon after application can seriously diminish the effectiveness of the product.

  • Avoid watering for 24 hours after spreading weed and feed.
  • Do not spread weed and feed if rain is forecasted to fall within 24 hours.
  • Water the day before spreading weed and feed, to ensure the lawn is damp but not wet.

Rain can wash away your weed control product just like a lawn sprinkler. If rain is likely to fall within 24 hours of applying weed and feed to your yard, wait to apply another day. If you’re worried about your lawn drying out, water the day before spreading weed and feed. This will keep the lawn moist, causing the weed and feed to stick to plant leaves and maintain grass health.

How Soon Can You Mow after Spreading Weed and Feed?

Allow 48 hours to pass after weed and feed application before mowing a lawn. Mowing can not only unevenly distribute fertilizer and herbicide, it can even throw weed and feed into garden areas, where the herbicide ingredients can harm vegetables and flowering plants.

  • Wait 48 hours before mowing.
  • Mowing too soon can spread weed and feed onto garden plants, potentially killing them.
  • Fertilizer may be spread unevenly by mowing.

The fertilizer in Scotts Turf Builder Weed and Feed performs best when allowed a full 48 hours to break down and enter the soil. For best results in killing weeds and building a healthier lawn, hold off on mowing after application.

How Soon Will Scotts Weed and Feed Show Results?

Scotts Turf Builder Weed and Feed does two things at once: feeds your yard and kills weeds. You will begin to see a greener, healthier grass in 1–5 days, with full results in 4–6 weeks. On the weed control front, Scotts will begin to kill weeds within 7 days but will show complete results in 14 days.

When applied correctly, weed and feed will deliver a big impact by both killing weeds and boosting your lawn’s performance. All it requires is patience and correct application to get the most out of the product.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.